Measuring - Epson Runsense SF-710 User Manual

SF-710/510/310 User Manual
Setting Measurements Using the PC Application (Run Connect) (SF-710 only)
F
Select the settings you want to write to the device, and then click Write to Wrist
Device.
Note:
Click View All on Map to check all the set waypoints on the map.
G
Click Yes.
Settings (positional information/title) are written to the device.
H
Click Close.

Measuring

See the following pages to set a waypoint, and then measure.
"Specifying and measuring waypoints" on page 60
U
"Measuring" on page 39
U
101