Measuring - Epson Runsense SF-710 User Manual

SF-710/510/310 User Manual
Setting Measurements Using the PC Application (Run Connect) (SF-710 only)
F
Set the Distance, Time, and HR Zone
for the Sprint Section (hard)/
Recovery Section (light).
Also, click No. of Repetitions, and
then click OK.
G
When registering multiple entries or
editing them, click the button and
perform operations.
When you have finished making
settings, click OK.
Note:
Since settings are repeated in unity when
Standard is selected, you cannot register multiple
entries.
H
Select the settings you want to write to
the device, and then click Write to
Wrist Device.
I
Click Yes.
Settings are written to the device.
J
Click Close.

Measuring

See the following pages to select the Interval settings,
and then measure.
"Loading interval conditions that have already been
U
set" on page 47
"Measuring" on page 39
U
103