Epson Runsense SF-710 User Manual page 147

SF-710/510/310 User Manual
Term
RUNSENSE View
Split time
Stride
Stride sensor
Time to HR Zone
Total Ascent
Total Descent
Water resistant at 5 barometric
pressures
Waypoint
Appendix
Definition
RUNSENSE dedicated Web application. This allows you to manage your
course, analyse your pace, check calories burnt, and check your condition.
The total time from starting to stopping the measurements.
The stride calculated from your running data.
This uses the GPS function to accumulate data on your stride and
acceleration allowing the device to estimate the distance travelled even
when you enter locations that cannot receive GPS signals, such as in a
tunnel.
The time until you arrive at the heart rate zone.
The total value of the height ascended from the measurement start point.
The total value of the height descended from the measurement start
point.
The device is water resistant at up to 5 barometric pressures.
The function acquires the latitude and longitude for the current position,
and register to the device as a point.
By specifying the registered point, you can display the direction and the
distance to the point, and the difference in elevation.
147