Disabling The Heart Rate Monitor - Epson Runsense SF-710 User Manual

SF-710/510/310 User Manual
Disabling the Heart Rate
Monitor
When disabling an heart rate monitor that has been
registered, set HR to OFF from the Measure set. menu.
Operation buttons
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
"Specifying a GPS (GPS Positioning)" on
U
page 29
B
Display the Measure set. menu.
Hold down B on the measurement screen.
Measuring Heart Rate (Heart Rate Monitor)
76
C
Select HR.
Use C/D to select, and then press A.
D
Select OFF.
Use C/D to select, and then press A.
E
Complete the settings.
Hold down A.
The measurement screen is displayed.