Epson Runsense SF-710 User Manual page 21

SF-710/510/310 User Manual
Mode
Chronograph AT Lap
❏ From device
Interval
Goal
❏ From PC application (Run Connect)*
AT Pause
U
Pause Function)" on page 56
Target Pace
❏ From device
❏ From PC application (Run Connect)*
Waypoint*
❏ From device
❏ From PC application (Run Connect)*
HR
U
❏ From device
Interval
❏ From PC application (Run Connect)*
Goal
U
Advance Is Reached (Goal Function)" on
page 50
* Only for the SF-710.
Preparing and Basic Operations
Measurement Settings
"Recording Laps Automatically (AT
U
Lap Function)" on page 54
"Setting the AT Lap Function (SF-710
U
only)" on page 94
"Automatically Start/Stop Measuring (AT
"Setting a Pace and Measuring (Target
U
Pace Function)" on page 57
"Setting the Target Pace Function
U
(SF-710 only)" on page 96
"Setting and Measuring Waypoints
U
(Waypoint Function)" on page 59
"Setting the Waypoint Function
U
(SF-710 only)" on page 99
"Measuring Heart Rate" on page 72
"Setting a Time and Distance for Hard
U
and Light Workouts (Interval Function)"
on page 43
"Setting the Interval Function (SF-710
U
only)" on page 102
"Measure until the Time or Distance Set in
When lap is paused
❏ When measuring is stopped
❏ When measuring restarts
❏ When you are off the target pace
❏ When you have set multiple target
paces and the target pace changes*
When you have reached to the set point
When you are off the HR Zone
❏ When changing between sprint/
recovery
❏ When the number of sets is
complete
❏ When 50/90% of the set time/
distance is reached
❏ When the set time/distance is
complete
21
Timing