Measure - Epson Runsense SF-710 User Manual

SF-710/510/310 User Manual

Measure

Using the positional information and time for the GPS signal, the time, distance, and speed are measured
automatically.
Also, training is supported for a variety of functions, such as the interval function.
"Measuring Time, Distance, and Speed (Chronograph Function)" on page 38
U
"Setting a Time and Distance for Hard and Light Workouts (Interval Function)" on page 43
U
"Measure until the Time or Distance Set in Advance Is Reached (Goal Function)" on page 50
U
"Recording Laps Automatically (AT Lap Function)" on page 54
U
"Automatically Start/Stop Measuring (AT Pause Function)" on page 56
U
"Setting a Pace and Measuring (Target Pace Function)" on page 57
U
"Setting and Measuring Waypoints (Waypoint Function)" on page 59
U
Measure
37