Gps Positioning - Epson Runsense SF-710 User Manual

SF-710/510/310 User Manual

GPS positioning

When you change to the measurement screen, the
device receives a signal from various satellites, and
identifies your position to use for measurement.
c
Important:
While identifying a GPS, make sure you are
outside with no obstructions overhead, and try to
keep the device as still as possible.
Operation buttons
A
Go to a location outside with no
obstructions overhead.
B
Perform GPS positioning.
Press C.
GPS positioning starts.
Preparing and Basic Operations
When the measurement screen is displayed, you can
start measuring.
"Measure" on page 37
U
Skipping GPS positioning
If you want to start measuring immediately, or if GPS
positioning is taking too long, select Skip during GPS
positioning and start measuring.
30
When GPS positioning is complete, the
positioning complete screen flashes, and then the
measurement screen is displayed.
Note:
It usually takes less than two minutes to complete
GPS positioning.
If it takes more than two minutes and Failed is
displayed, we recommend selecting Cancel,
moving to a different location, and trying again.