Using Bluetooth: Pairing Your Device - iHome iBT21 Instruction Manual

Using Bluetooth: Pairing Your Device

NOTE: See the iBT21 Bluetooth Connection Guide for complete pairing details.
Whenever AC power is connected, this unit will attempt to autolink to a previously paired device. If no
device is paired, the unit will automatically enter pairing mode for 2 minutes. You can manually initiate
pairing without turning on the unit by following steps 1-3 below.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it
"discoverable" by turning on Bluetooth mode (check in Options or Settings) .
2. Press and hold the Bluetooth Pairing Button on the back of the unit for 2 seconds. The unit will beep
and the Bluetooth icon will flash on the display, indicating the unit is in pairing mode.
3. "iHome iBT21" should appear in your device's menu. If "Not Paired", "Not Connected" or similar
message appears, select "iHome iBT21" to connect it. If prompted for a passcode, enter "1234" on
your device's keypad.
4. If pairing is successful, 2 beeps will sound, "PAIR" will appear briefly in the bottom display and the
Bluetooth icon will become solid. There should also be an indication on your device. If no device is
successfully paired within 2 minutes the unit will default to previous mode.
device, it will attempt to autolink when the device is within range (about 30 feet).
Using the
8
iBT21
Once unit is paired to a