Troubleshooting - iHome iBT21 Instruction Manual

Unit doesn't respond (no power)
• Check that all connections are correct and properly plugged in.
• Make sure your device is properly paired with the iBT21.
• Make sure the Power is ON, indicated by "ON" appearing briefly on the display and the LED indicator
lighting up.
• When turning unit on via Bluetooth (initiate play mode on paired device) unit can take up
up to 10 seconds to power on.
Resetting the Unit
If the iBT21 is not operating properly, you may wish to reset the unit. To do so, unplug the AC adapter
and remove the batteries from the unit. NOTE: You will then need to reset the time and any previously set
alarms.
Trouble pairing device/computer with iBT21
Bluetooth implementation varies depending on your device's hardware and operating system. Please see
our website for updates on pairing.
• Make sure you have the latest firmware for your device.
• Make sure your device is working properly. Check your device's manual for details on Bluetooth pairing
and linking.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (approx. 30 feet). To pair with a different device you must turn
off Bluetooth capability on the already paired device, or take it out of range.
For further information and to see the latest instructions, visit www.ihome.com/support
15

Troubleshooting