Related Manuals for iHome iKT50
Summary of Contents for iHome iKT50
- Page 1 Model: iKT50 dual charging alarm clock with speakerphone and removable battery CHARGE K-CELL BEFORE instruction manual Questions? Contact Customer Service at 1-800-288-2792...
- Page 2 Introduction Thank you for purchasing the iHome K4. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, tablet or other Bluetooth audio device and mobile charging on the go with the included removable K-Cell rechargeable battery.
- Page 3 Removable K-Cell Rechargeable Lithium-ion Battery This device uses a removable rechargeable lithium-ion battery (K-Cell) that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit.
-
Page 4: Table Of Contents
Table of Contents Included ..............................4 Meet Your K4 ............................5 Display..............................6 Setting Up the Unit..........................6 Charging Charging the K-Cell When Docked in Unit/Battery Level Meter..............7 Charging the K-Cell via USB.......................8 Charging Devices Using the K-Cell/Charging Devices Using the USB Charging Port........9 Setting The Clock ..........................10 Setting and Using the Alarms ...................... -
Page 5: Included
Included • K4 Unit • K-Cell • AC adaptor • FM antenna K4 Unit K-Cell AC adaptor FM antenna... -
Page 6: Meet Your K4
Meet Your K4 Power Play/Pause and Mode Button Presets Button Power/Alarm Reset Button Sleep/Time Set Button Alarm 1/Alarm 2 Buttons Microphone Plus/Minus Settings/ Volume Down/ Talk/End Call Buttons Volume Up Buttons K-Cell Snooze/Dimmer Button Line up arrow on K-Cell with arrow on cabinet to insert K-Cell Back Left Side... -
Page 7: Display
The Display Time Display PM/AM Indicators Low Backup Battery Indicator Sleep Mode Indicator Mode/Wake to Alarm Active Indicator Alarm Source Indicators: Radio Mode Indicator Bluetooth device, Bluetooth Indicator Radio frequency, Tone Setting Up the Unit • Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet to power the unit and charge K-Cell. -
Page 8: Charging The K-Cell When Docked In Unit/Battery Level Meter
Charge inserted K-Cell fully before use. For first time use, charge for at least 3 hours. Use iHome K-Cell battery ONLY. Do NOT attempt to use with/insert other USB battery cells. To insert K-Cell: Line up arrow on top and bottom of K-Cell with arrow on top of cabinet before inserrting K-Cell. -
Page 9: Charging The K-Cell Via Usb
Using the Charging the K-Cell via USB Charge K-Cell fully before use. For first time charge, charge for at least 3 hours. Connect a micro USB cable to the micro USB Charging Port on the top of the K-Cell and connect the other standard USB plug to a computer, USB AC adaptor (not included) or other USB power source. -
Page 10: Charging Devices Using The K-Cell/Charging Devices Using The Usb Charging Port
Using the Charging Devices Using the K-Cell Charge K-Cell fully before use. For first time charge, charge for at least 3 hours. Connect the USB cable plug included with your device to the standard Charging Port on the top of the K-Cell and connect the other end to the device you wish to charge. -
Page 11: Setting The Clock
Using the Setting the Clock 1. Press and hold the Sleep/Time Set Button for 2 seconds until “DST ON” flashes on the display and a beep sounds, indicating automatic daylight saving time feature is active and the unit will add or subtract an hour automatically at the start or end of daylight saving time. -
Page 12: Previewing The Alarm And Turning The Alarm On/Off
Setting and Using the Alarm (Continued) Using the 2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting). Make sure you set the correct AM/PM alarm time. 3. Press the Alarm Button to confirm the alarm time setting. The alarm schedule will flash. 4. -
Page 13: Using The Fm Radio/Setting And Using Fm Presets
Using the Using the FM Radio 1. Press and release the Mode Button as needed until the FM indicator icon and current FM radio frequency appear on the display. 2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). -
Page 14: Using Fm Radio In Other Countries
Using the Using FM Radio in Other Countries Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA: 1. Make sure unit is OFF. 2. -
Page 15: Using Bluetooth: Pairing Your Device
“PAIR” and the Bluetooth icon will flash on the display indicating the unit is in pairing mode. 4. “iHome Kineta K4” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome Kineta K4” to connect it. If prompted for a passcode, enter “1234”... -
Page 16: Pairing With A Different Device / Playing Audio Via Bluetooth
Using the Pairing with a Different Device Pairing with a Different Device When you power ON the unit, it will automatically link with the most recently connected Bluetooth device as long as that device is still within range (approx. 30 feet). If no device is found within 3 minutes, the unit will begin a power down countdown and shut off after 12 minutes. -
Page 17: Speakerphone Operation
Using the Speakerphone Operation NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. When a call is received, playing music is muted to hear the ring tone. 1. Press the Button to answer a call, or press the Button to ignore the call. -
Page 18: Playing Audio Via Aux In
Using the Playing Audio via Aux In 1. Connect one end of a standard 3.5mm stereo audio cable (not included) to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device. 2. -
Page 19: Replacing And Installing Clock Backup Battery
Using the Replacing and Installing Clock Backup Battery Note: 1 CR2450 battery is included with the unit. Remove pull tab before using the unit. This model is equipped with a battery backup circuit that will maintain the time and other settings in the event of a temporary power interruption (the display is NOT maintained). -
Page 20: Consumer Product Safety Guide
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free... -
Page 21: Fcc Information
FCC/IC Information FCC ID: EMOIKT50 IC ID: 986B-IKT50 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. -
Page 22: Troubleshooting
(approx.30 feet). To pair with a different device you must turn off Bluetooth capability on the already paired device, or take it out of range. For further information and to see the latest instructions, visit www.ihome.com/support... -
Page 23: Warranty
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Need help?
Do you have a question about the iKT50 and is the answer not in the manual?
Questions and answers