Table of Contents
Advertisement
2.1 Initial Inspection
We have carefully inspected the MIC-3042 series mechanically and electrically
before shipping. It should be free of marks and scratches and in perfect working
order upon receipt. As you unpack the MIC-3042 series, check it for signs of shipping
damage (damaged box, scratches, dents, etc.). If it is damaged or fails to meet
specifications, notify our service department or your local representative
immediately. Also notify the carrier. Retain the shipping carton and packing material
for inspection by the carrier. After inspection, we will make arrangements to repair or
replace the unit.
Warning!!!
We strongly recommend that only qualified, experienced
personnel install or remove components. They must exercise extreme
caution when doing so.
Warning!!!
Service personnel must make sure that the power cord has
been pull out before striping down any component. After service, ground
wire have to be connected certainly before power cord.
2.2 The MIC-3042 Illustration
The MIC-3042 series are designed to be installed and maintained easily.
Figure 2-1 and Figure 2-2 illustrate important components on the front and hot
swappable parts of the enclosure.
Figure 2-1: Front view of MIC-3042
MIC-3042 User Manual --- Page
7
Advertisement
Table of Contents
