Explanation Of Time Chart Monitor - Panasonic FP7 User Manual

Trace Operation and Time Chart

5.3.2 Explanation of Time Chart Monitor

The time chart window is composed of the following parts.
A-1
 Names and functions of parts
Mark Name
Trace data display area
A-1
(All devices)
Trace data display area
A-2
(Contact devices)
Trace data display area
A-3
(Data devices)
B-1 Graph display area
B-2 Time display area
Trace information display
B-3
area
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
5-8
C-1
B-3
B-1
A-2
A-3
Function
Displays the devices registered in the target LOG for the time chart
display.
・Select the device to be displayed in graphs from this list.
・Corrensponding data is displayed at the position of the cursor [C] or [R]
in the graph display area (B-1).
・Contact data selected in A-1 is displayed in this area.
・When a lot of devices are registered, a scroll bar is displayed.
・Data other than the contact data selected in A-1 is displayed in this area.
・Up to six data can be displayed in this area.
・Pressing the button which displays a deivce name can change the line
color.
・Displays trace data as line graphs in chronological order. (The on/off
state of contacts is displayed with rectangular wave form.)
・The vertical line with a [T] mark is displayed at the point where a trigger
occurs.
Displays the time between arbitrary two points or the time between the
point where a trigger occurs and an arbitrary point using the two cursors
[C] and [R] in B-1.
However, time is not displayed when the selected trigger type is other
than "Constant period".
・Displays the number of samplings and sampling rate.
・The sampling rate is displayed by time unit when the logging trigger is
"Constat period".
When the logging trigger is "Bit" or "Instruction", this area is not available.
(A hyphen is displayed.)
B-2