Trace Operation and Time Chart
5.3.2 Explanation of Time Chart Monitor
The time chart window is composed of the following parts.
Names and Functions of Parts
Code
Name
A-1
Device List
A-2
Trace Monitor
B-1
Graph display area
B-2
Time scale display area
KEY POINTS
•
The time scale display area is available only when the logging trigger is
"Cycle". This area is not displayed when the logging trigger is "Bit" or
"Instruction".
5-8
C-1
C-2
B-1
A-1
A-2
Function
Displays all the devices registered in the target LOG for the time chart
display.
- Select the device to be displayed in graphs from this list.
- Data corresponding to the range specified by the scroll bar at the
bottom of the graph display area is displayed.
- By double-clicking a line in the device list, registering and editing
devices can be performed.
-The execution state of the race operation is monitored in this area.
- The contents of occurred errors can be confirmed.
- Trace data is displayed as line graphs in chronological order. (The
on/off state of contacts is displayed with rectangular wave form.)
- The vertical line with a [T] mark is displayed at the point where a trigger
occurs.
Displays the time between arbitrary two points of B-1 or the time between
the point whee a trigger occurs and an arbitrary point.
However, time is not displayed when the selected trigger type is other
than "cycle".
B-2