Panasonic FP7 User Manual page 27

3. Double-click a desired buffer memory in the right pane.
The LOG 0 - LOG 15 file settings dialog box is displayed.
4. Set information in each field of File definition, Data logging condition and
Trace stop.
For the setting method, refer to the section of 2.3.2 LOG FIle Setting Items (For
Trace).
5. Press the [OK] button.
This returns to the Logging/Trace Settings dialog box.
KEY POINTS

"No. of samplings after stop trigger" is available only when the stop trigger
is set to Bit.

Check the box of "Write file after completion of trace" to create a file in an
SD memory card after the completion of trace.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
2.3 Trace Information Setting