Selection Of Sd Memory Cards - Panasonic FP7 User Manual

1.1.2 Selection of SD Memory Cards

 Usable SD memory cards
Please use Panasonic SD memory cards (for industrial use).
(Note) An operation check has not been conducted for SD memory cards made by other
manufacturers.
Printed logo
on CPU unit
 Cautions on handling an SD memory card
The data saved in the SD memory card may be lost in the following cases. We assume no
responsibility whatsoever for the lost of saved data.
 The user or a third party has misused the SD memory card.
 When the SD memory card was affected by any static electricity or electrical noise.
 The SD memory card was taken out, or the PLC body was powered off, while the card was
being accessed.
 Formatting an SD memory card
In principle, SD memory cards have been formatted by the time of purchase, and no
formatting by the user is required. If formatting becomes necessary, download formatting
software for SD memory cards on the following website.
NOTES

A file system formatted by PC's standard formatting software does not
satisfy the SD memory card specifications. Please use the dedicated
formatting software.
It is recommended to save important data in another media for backup.
Never remove the card or power off the PLC body while the SD LED on the
CPU unit is flashing (data is being read from or written into the card). Data
may be damaged.

Do not use an SD memory card the memory capacity of which is more than
the usable capacity. Data in the card may be damaged.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Card type
SD memory card
SDHC memory card
1.1 For Using Logging and Trace Functions
Usable SD memory cards
2GB
4GB to 32GB
Capacity