Using The User Menu (Example Menu Operation) - Sony PDW-F335L Operating Instructions Manual

To confirm the selection of a menu, a
setting item, or a setting value
Each time you press the MENU knob, the menu display
switches in the following sequence.
Example: When using the OPERATION menu
TOP menu
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
If the menu
DIAGNOSIS
ADVANCED
has not
been used
If the menu has been
used before
Menu selection mode
? 10 OUTPUT TOP
COMPONENT OUT: AUTO
HD SD (PLAY BACK): 16:9
Setting item selection mode
10 OUTPUT TOP
COMPONENT OUT: AUTO
HD SD (PLAY BACK): 16:9
Setting value selection mode
10 OUTPUT TOP
COMPONENT OUT: ? AUTO
HD SD (PLAY BACK): 16:9
Note
If the TOP menu has not been displayed since the
camcorder is powered on, "TOP" does not appear at the
upper right on the above screen, and you cannot go to the
TOP menu. In this case, follow the procedure in "To
display the TOP menu" on page 132.
To display the TOP menu when another menu is
displayed
Move b to "TOP" displayed at the top right of each page
of the menu, and press the MENU knob. Or flick the
MENU switch repeatedly to ON until the TOP menu is
displayed.
CONTENTS page
? 00 CONTENTS TOP
01.FORMAT
02.SPECIAL EFFECTS
03.ASSIGNABLE
04.DISC
05.CLIP TITLE
06.FILE NAMING
07.GAIN SW
08.EZ MODE / TLCS
09.OFFSET WHITE
10.OUTPUT
Menu selection page
00 CONTENTS TOP
01.FORMAT
02.SPECIAL EFFECTS
03.ASSIGNABLE
04.DISC
05.CLIP TITLE
06.FILE NAMING
07.GAIN SW
08.EZ MODE / TLCS
09.OFFSET WHITE
10.OUTPUT
Using the USER Menu (Example
Menu Operation)
This section explains menu operations using the USER
menu as an example. The operations are the same for the
ALL, OPERATION, PAINT, MAINTENANCE, FILE,
DIAGNOSIS, and ADVANCED menus. For details about
how to operate the USER MENU CUSTOMIZE menu, see
"Editing the USER Menu" on page 134.
1
Flick the MENU switch to ON.
Normally, the USER menu appears.
If it does not, turn the MENU knob to move b to
USER in the TOP menu, and press the MENU knob.
If the USER menu has been used before, the last
accessed page appears. In this case, go to step 2.
If this is the first time the USER menu has been
displayed, the CONTENTS page of the USER menu
appears. In this case, follow the procedure below.
1 Press the MENU knob. Then turn the MENU knob
to move b to the desired page number.
U00 CONTENTS
0 01.PAINT
02.SCENE FILE
03.FORMAT
04.SPECIAL EFFECTS
05.ASSIGNABLE
06.DISC
07.OUTPUT
08.VF SETTING
09.MARKER
10.SKIN DETAIL
2 Press the MENU knob again.
The page selected in 1 is displayed. Go to step 3.
When you set items on the ALL, OPERATION,
PAINT, MAINTENANCE, FILE, DIAGNOSIS, and
AVDVANCED menu, move b to the menu that
contains the desired item in the TOP menu, and then
press the MENU knob.
2
Turn the MENU knob until the desired page appears.
?U01 PAINT
A.IRIS :
DETAIL LEVEL :
MASTER BLACK :
GAMMA SELECT :
MASTER GAMMA :
BLACK GAMMA :
PRESET MTX SEL :
3
Press the MENU knob.
b and z appear.
TOP
This indicates
that the menu
screen can be
scrolled.
b
TOP
0
0
0
STD
0
00
STD
Menu Organization and Operation
133