Sony PDW-F335L Operating Instructions Manual page 74

?006 FILE NAMING
NAMING FORM
AUTO NAMING
5
Turn the MENU knob to select "AUTO NAMING",
and then press the MENU knob.
C****: Assign standard format clip names
automatically.
TITLE: Assign clip titles as clip names.
6
Turn the MENU knob to display "TITLE", and then
press the MENU knob.
The same name will now be given to newly recorded
clips.
Note
When the first letter of the title setting on the CLIP
TITLE menu is a space or period (.), the clip name is
the title string minus the first letter.
To enable clip and clip list renaming by FAM
Carry out steps 2 to 6 of "To assign clip names on this
unit".
It is now possible to write, transfer, and rename clips and
clip lists with user-defined names over file access mode
(FAM) connections (see page 160).
To rename a clip, execute "Rename" on a clip with the
extension ".MXF" in the Clip folder.
The ".MXF" extension cannot be changed.
Clip renaming by FAM is enabled
To rename a clip list, execute "Rename" on a clip list with
the extension ".SMI" in the Edit folder.
The ".SMI" extension cannot be changed.
Clip list renaming by FAM is enabled
To check clip names
Press the THUMBNAIL button to display the thumbnail
screen, and select the clip whose name you want to check.
74
Recording – Advanced Operations
TOP
: FREE
: TITLE
Fuji.MXF
Sakura.SMI
The name of the selected clip appears at the upper left of
the screen.
However, when the clip has a title, the title is displayed
instead. Titles are enclosed in double quotation marks
(" ").
See "Thumbnail Search" (page 78) for more information
about the thumbnail screen.
Notes
• Items in the upper left of the screen are displayed in the
following order of priority.
Title > user-assigned clip name > standard clip name
Therefore, the display changes as follows, depending on
whether a clip has a title.
- The title is displayed for clips recorded on this unit
which have titles.
- The user-assigned or standard clip name is displayed
for clips which do not have titles.
1)
• On XDCAM devices with firmware earlier than
version 1.4, clips with user defined names are displayed
as "C5000" to "C9999" in the order of recording.
• Clip names and clip list names are converted as follows
for display in the thumbnail screen and the CLIP menu.
- If the clip name is longer than 15 characters, then the
first 9 characters and the last 5 characters are
displayed. Other characters are converted into s
symbols.
- Lowercase characters are converted to uppercase.
- Kanji and other multibyte characters and some
symbols are converted into s symbols. Sequences of
s symbols are converted into a single s symbol.
The following 21 symbols can be displayed.
: . ? ! # * / ( ) + - & @ = < > % " ; _ $
1) PDW-F350/F330, PDW-530/510, PDW-F70/F30, PDW-1500, PDW-
R1, PDW-V1, PDW-D1, and PDW-70MD
Display example
JumpingDolphin_No103
r
JUMPINGDO s NO103
To check clip information (name, title, etc.) by
using a menu
See "Basic Menu Operations" (page 132) for more
information about menu operations.
Display the CLIP STATUS page of the DIAGNOSIS
menu, and then press the MENU knob.
The current settings for each item are displayed on the
right side.