Sony PDW-F335L Operating Instructions Manual page 172

Operation/alarm
message
LOW LIGHT
HIGH TEMPERATURE Indicates that temperatures have
A message for VDR operation is displayed in the setting
change and adjustment progress message display area of
the viewfinder screen (see page 31).
Message
ILL. Disc!
ILL. Index!
No FS!
Unknown FS!
No Support!
FORMAT NG!
Disc Damage
Non AV Full
MAX # Files
DI read err
Read err
DRV ADJ err
Run Salvage
Salvage NG
REC INHI.!
HD 50I/25P
HD 60I/30P
HD 23P Disc
525/60
625/50
2CH×16 Clip
4CH×16 Clip
Index File!
172
Operation Warnings
Meaning
Appears, depending on the
setting, to indicate the subject
illumination is inadequate.
risen inside the unit. Avoid
continued use in this state.
Meaning and action to take
The disc cannot be used by this
unit. Insert another Professional
Disc.
Index file or file system error.
Exchange or format the disc.
A recorded clip cannot be handled
by this unit. Exchange or format
the disc.
The disc cannot be used by this
unit. Exchange the disc.
The disc cannot be recorded. To
record, exchange the disc.
The disc is full. Exchange or
format the disc.
The disc was not recognized. Try
ejecting the disc and inserting it
again. Or exchange the disc.
Salvage processing needs to be
done on the disc. To record on the
disc, eject the disc, insert it again,
and execute salvage processing.
Salvage processing failed. For
details, see "Handling of Discs
When Recording Does Not End
Normally (Salvage Function)" on
page 52.
The Write Inhibit tab of the disc is
in the recording disabled position,
or salvage processing needs to be
done on the loaded disc. Set the
tab to the recording enabled
position. Or eject the disc, insert it
again, and perform salvage
processing.
The loaded disc has a different
recording format. Exchange the
disc, or change the recording
format.
There is an unsupported index file
on the disc to which you are trying
to record. Exchange or format the
disc.
Message Meaning and action to take
File System There is an unsupported file
system on the disc to which you
are trying to record. Exchange or
format the disc.
a) Disc operations are not possible
KEY INHI.!
when the DC IN connector is not
connected and the CA-755 is
being used.
ILL. PLAY! An A/V phase error occurred
during playback. Stop the disc.
Lid Closed! The lid of the disc compartment
does not open. Check the lid.
Press the EJECT button to open
the lid.
Lid Open! The lid of the disc compartment is
not closed. Close it securely.
No Clip! There are no clips recorded on the
disc. Exchange for a recorded
disc.
No Disc! There is no disc loaded. Insert a
disc and try the operation again.
STOP ONCE! The operation is not possible while
REC mode! the disc is being played or
recorded. Stop the disc.
Disc Top! The operation is not possible
Disc End! because the disc is at the top or
end.
Formatting! The disc is being automatically
formatted. Wait until the format
ends.
Recording The unit is writing to the file
system. Wait until writing finishes.
No EM Space Essence marks cannot be
inserted. For details, see
EM Full!
"Recording Shot Marks" on
page 67.
SB CLP mode Press the SEL/SET button (four-
way arrow key) up to clear the
SUB CLIP indicator before
carrying out the operation.
No SEL List No clip list is selected. Create a
new clip list, or load a clip list from
the disc.
No List! There is no clip list. Create a clip
list.
No SUB Clip There are no sub clips in the clip
list. Register a sub clip, or load
another clip list.
SUB Clip NG The In and Out point positions are
invalid. Set correct In and Out
points.
MAX# SB CLP The total number of sub clips is
over the upper limit (300).
CL OVER DUR The total duration of sub clips in
the current clip list is over the
upper limit (24 hours).