Internal Memory; Recording With The Clip Continuous Rec Function - Sony PDW-F335L Operating Instructions Manual

D03 CLIP STATUS
CLIP NO : 001/010
NAME : C0001
TITLE :(no name)
RECORD DEVICE: PDW-F335
SERIAL : 10001
DATE : 08/01/06
TIME : 15:00:05
To create a list of title prefix strings
Prepare the data beforehand according to the following
rules.
File name
Assign the name "TITLES.TXT" to the file.
Input format
Enter title prefixes one at time, separated by newline
(CRLF) characters.
Prefixes can be up to 10 characters long. A prefix file can
contain up to 20 prefixes.
Allowable characters
• Digits: 0 to 9
• Alphabetic characters: a to z, A to Z
• The following symbols: ! , #, $, %, &, ', ( , ) , ~, =, -, ^,
@, [, ], {, }, +, ; (semicolon), , (comma), . (period), _
(underscore)
• Space
Title prefix list example
Tennis<CRLF>
Basketball<CRLF>
Skiing_1<CRLF>
Skiing_2<CRLF>
To transfer a title prefix list to the unit's

internal memory

Proceed as follows.
1
Copy the title prefix file (TITLES.TXT) to the
following folder on the "Memory Stick".
\\MSSONY\PRO\XDCAM\GENERAL\VAL_LIST
Note
This folder is created when you insert a "Memory
Stick" into the camcorder. Do not create this folder
yourself on a computer.
2
Insert a "Memory Stick" with the title prefix file
(TITLES.TXT) into the "Memory Stick" slot of the
camcorder.
3
On the CLIP TITLE page, select LOAD PREFIX
DATA and then press the MENU knob.
TOP
"MEMORY STICK ACCESS" appears, and the file
on the "Memory Stick" (TITLES.TXT) is transferred
to the internal memory of the unit.
The message "COMPLETE!" appears when the
transfer finishes.
Note
The message "FILE NOT FOUND!" appears if no list
of title prefixes is found.
Check the location where the file is stored on the
"Memory Stick".
To select a prefix from the title prefix list
Proceed as follows.
1
On the CLIP TITLE page, select SELECT PREFIX
and then press the MENU knob.
A list of up to 20 title prefixes appears.
?P00 TITLE PREFIX
001: Tennis
002: Basketball
003: Skiing_1
004: Skiing_2
005: Athletics
006: Aquatics
007: Cycling
008: Softball
009: Fencing
010: Sailing
Note
When no list of title prefixes has been transferred to
the internal memory of this unit, only the initial value
"TITLE" appears.
2
Select the desired title prefix from the list, and then
press the MENU knob.
The CLIP TITLE page appears again, and the selected
prefix appears in the PREFIX field.
Recording with the Clip Continuous
Rec Function
Normally, a clip is generated as an independent file every
time recording starts and stops. The Clip Continuous Rec
function allows you to continue recording to the same clip
until the function is turned off, regardless of how many
times recording starts and stops. This is convenient if you
want to avoid generating a large number of short clips, or
if you want to record without worrying about the limit on
the number of clips (maximum 300). A REC START
essence mark is recorded whenever recording starts, which
makes it easy to find the recording start points.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
ESC
Recording – Advanced Operations
75