Sony PDW-F335L Operating Instructions Manual page 112

OPERATION menu
No. Page Item
09 OFFSET OFFSET WHITE <A> ON / OFF
WHITE
WARM-COOL <A>
COLOR FINE <A>
OFFSET WHITE <B> ON / OFF
WARM-COOL <B>
COLOR FINE <B>
10 OUTPUT COMPONENT OUT
HDtSD
(PLAYBACK)
i.LINK MODE
11 VIDEO OUT VIDEO OUT VFDISP
VIDEO OUT MENU
VIDEO OUT TC
VIDEO OUT ZEBRA
VIDEO OUT
MARKER
112
Menu Organization and Operation
Settings Default USER
menu
page
OFF –
Display color 3200
temperature
(converted
from R/B
Gain).
(–99 to +99) 0
OFF
Display color 3200
temperature
(converted
from R/B
Gain).
(–99 to +99) 0
AUTO / AUTO 07
HD YPbPr /
SD YPbPr
16:9 / 4:3 16:9
AV/C /FAM AV/C –
ON / OFF ON –
OFF
Description
See "Specifying an Offset for the
Auto White Balance Setting" on
page 143.
Selects the output from the BNC
connector on the side panel of this
unit.
AUTO: Switch between HD YPbPr
and SD YPbPr, according to
the recording format. (For both
recording and playback)
HD YPbPr: Regardless of the
recording format, output HD
YPbPr when recording. Output
SD YPbPr only when playing
back DVCAM format.
SD YPbPr: Regardless of the
recording format, output SD
YPbPr. (For both recording and
playback)
Selects the aspect ratio for output
to an SD monitor after
downconvert during playback of
material recorded in HD.
You can select 16:9 (squeeze) or
4:3 (crop).
Selects the function of the i.LINK
connector.
Selects whether or not the VF
DISP display signal is mixed to the
output signal from the VIDEO OUT
connector.
Selects whether or not the menu
display signal is mixed to the
output signal from the VIDEO OUT
connector.
Selects whether or not the
timecode is mixed to the output
signal from the VIDEO OUT
connector.
Selects whether or not the zebra
mark display signal is mixed to the
output signal from the VIDEO OUT
connector.
Selects whether or not the marker
signal is mixed to the output signal
from the VIDEO OUT connector.
File
A
A
A