Using The User Menu (Example Menu Operation) - Sony PDW-700 Operation Manual

To display the TOP menu when another
menu is displayed
Move b to "TOP" displayed at the top right of
each page of the menu, and press the MENU
knob. Or flick the CANCEL/PRST/ESCAPE
switch repeatedly to ESCAPE until the TOP
menu is displayed.
Using the USER menu (example
menu operation)
This section explains menu operations using the
USER menu as an example. The operations are
the same for the ALL, OPERATION, PAINT,
MAINTENANCE, and DIAGNOSIS menus.
For details about how to operate the USER MENU
CUSTOMIZE menu, see "Editing the USER menu"
(page 144).
1
Set the MENU ON/OFF switch to ON.
Normally, the USER menu appears.
If it does not, turn the MENU knob to move
b to USER in the TOP menu, and press the
MENU knob.
If the USER menu has been used before, the
last accessed page appears. In this case, go to
step 2.
If this is the first time the USER menu has
been displayed, the CONTENTS page of the
USER menu appears. In this case, follow the
procedure below.
1 Press the MENU knob. Then turn the
MENU knob to move b to the desired
page number.
?U00 CONTENTS
01.OUTPUT 1
02.OUTPUT 2
03.SUPERIMPOSE
04.LCD
05.REC FUNCTION
06.ASSIGNABLE SW
07.VF DISP 1
08.VF DISP 2
09.'!' LED
10.MARKER 1
This indicates that the menu
screen can be scrolled.
2 Press the MENU knob again.
The page selected in 1 is displayed.
Go to step 3.
When you set items on the ALL,
OPERATION, PAINT, MAINTENANCE,
FILE, and DIAGNOSIS menus, move b to
the menu that contains the desired item in the
TOP menu, and then press the MENU knob.
2
Turn the MENU knob until the desired
page appears.
?U05 REC FUNCTION
CACHE REC
3
Press the MENU knob.
b and z appear.
U05 REC FUNCTION
CACHE REC
4
Turn the MENU knob to move b to the
desired item, and then press the MENU
knob.
b changes to z, and z changes to ?.
5
Turn the MENU knob to change the
setting.
Depending on the direction of turning the
knob, the setting value increases, decreases,
TOP
switches between ON and OFF, and so on.
To interrupt changing the settings
Set the MENU ON/OFF switch to OFF.
By setting the MENU ON/OFF switch to ON
again, the values that were displayed when
you interrupted the setting operations will
reappear so you can continue making
settings.
6
Press the MENU knob.
z changes to b, and ? changes to z. The
selection is confirmed.
7
To continue setting other items on the
same page, repeat steps from 4 to 6.
TOP
: OFF
TOP
: OFF
Menu Operations 143