Sony PDW-F335L Operating Instructions Manual page 173

Message Meaning and action to take
FAN Stopped The main unit or drive fan has
DR-FAN Stop stopped. Avoid use under high
temperatures, turn off the power,
and contact your Sony dealer.
a) REC INHI.! appears if you attempt to start recording.
Alarm messages during thumbnail search,
scene selection, and clip list operations
Alarm messages may appear in the LCD monitor during
thumbnail search, scene selection, and clip list operations.
In this case, take the action indicated in the following table.
Message Meaning and action to take
CANNOT EXPAND The clip cannot be expanded into
CLIP ANY FURTHER. more blocks.
This appears when the EXPAND
button is pressed when the
number of block is maximum, or
when the duration of an expanded
thumbnail is 1 frame.
SELECTED ESSENCE The selected essence mark does
MARK DOES NOT not exist.
EXIST. This appears in the essence mark
selection screen when the
specified essence mark does not
exist on the disc.
SUB CLIP IS INVALID. The temporal relationship between
SET APPROPRIATE the specified In and Out points in a
TRIM operation (see page 93) is
IN/OUT POINTS.
not correct.
Reset so that the value of the Out
point timecode is larger than the
value of the In point timecode.
DURATION OF ONE The total duration of the current
CLIP LIST MUST BE clip list is greater than 24 hours.
LESS THAN 24 This appears when the total
HOURS. duration of the current clip list
exceeds the upper limit of 24
hours as the result of a sub clip
ADD (see page 89) operation or a
TRIM operation (see page 93).
NO MORE SUB CLIPS The upper limit of sub clips in the
CAN BE ADDED TO current clip list has been
THE CLIP LIST. exceeded.
This appears when the total
duration of the current clip list
exceeds the upper limit of 24
hours as the result of a sub clip
ADD (see page 89) operation or a
TRIM operation (see page 93).
SUB CLIP DOES NOT There are no sub clips in the
EXIST. current clip list.
This appears when an attempt is
made to execute a MOVE (see
page 93), TRIM (see page 93),
DELETE (see page 94), or TC
PRESET operation (see page 95)
with no sub clips in the current clip
list.
Message Meaning and action to take
CLIP LIST DOES NOT There are no clip lists on the disc.
EXIST. This appears when an attempt is
made to execute a DELETE CLIP
LIST operation (see page 97)
when there are no clip lists on the
disc.
MOVE IS INVALID. The sub clip cannot be moved.
This appear hen an attempt is
made to execute a MOVE
operation (see page 93) when
there are no sub clip in the current
clip list, or when there is only 1.
SHOT MARK DOES The specified shot mark has not
NOT EXIST. been recorded.
This appears when an attempt is
made to execute a DELETE SHOT
MARK operation on a clip when
the specified shot mark has not
been recorded for that clip.
REC START CANNOT REC START cannot be deleted.
BE DELETED. This appears when an attempt is
made to delete a REC START with
a DELETE SHOT MARK
operation. DELETE SHOT MARK
can delete only SHOT MARK1 and
SHOT MARK2.
CLIP IS LOCKED. The clip is locked.
This appears when an attempt is
made to delete a clip, set the clip
thumbnail, or delete a shot mark
when the clip is locked.
ALL CLIPS ARE All clips are locked.
LOCKED. This appears when an attempt is
made to execute a LOCK ALL
CLIPS operation when all clips are
already locked.
ALL CLIPS ARE All clips are unlocked.
UNLOCKED. This appears when an attempt is
made to execute an UNLOCK ALL
CLIPS operation when all clips are
already unlocked.
173
Operation Warnings