Other Displays; Display Of Touchtone Entry; Large Lcd Display Phones &Constant Message Count - Panasonic PanaVOICE system Technician Manual

2-26 Installing PanaVOICE with an OAI Integration PanaVOICE2_0
Other Displays
In
some cases, the telephone system may temporarily control the display area where
the constant message count usually appears. Such a display appears until the voice
messaging system updates the constant message count. For details on the update
interval, see page 2-25.
Display of Touchtone Entry
Note that whenever a touchtone is pressed, the Panasonic DBS display phone replaces
whatever appears on the first line with the touchtone's number. This occurs for any
touchtone entry from Panasonic DBS display phones.
For example,
if the voice messaging system has displayed
the constant message count
on a subscriber's telephone:
If a subscriber picks up the handset and presses the 9 touchtone, the Panasonic DBS
display phone displays 9 on the first line:
9
7'NEWMSGS
Large LCD Display Phones & Constant Message Count
When a subscriber with a Panasonic DBS large-display phone finishes using voice mail
functions, the LCD lists options for use specifically with the Panasonic DBS telephone
system. PERSONAL DIAL, SYSTEM DIAL, and the others shown in Figure 5 are not voice
messaging system options.
^ .,
0830 Tue MAY 09
7MSG&l~URG I
PERSONAL DIAL
SYSTEM DIAL
EXTENSION
FUNCTION
Figure 5 .&ample of non-voice messaging system options on the large LCD
Once the subscriber dials his or her voice mailbox, voice messaging system options
replace the Panasonic DBS telephone system options. Non-voice messaging system
options may vary based on programming used with the Panasonic DBS telephone
system.