Playing Back A Tape With Digital - Sony DCR-IP5 Operating Instructions Manual

Playing back a tape with digital effects
During playback, you can process a scene using the digital effect function: STILL,
FLASH, LUMI., and TRAIL.
(1)
In playback or playback pause mode, select FN, then press the center 0 on the
control button. The PAGE1 screen appears.
(2) Select PAGE2, then press the center 0 on the control button. The PAGE2
screen appears.
(3) Select DIG EFFT, then press the center 0 on the control button. The DIG EFFT
screen used for selecting the desired digital effect mode appears.
(4) Select the desired digital effect mode, then press the center 0 on the control
button.
In STILL or LUMI. mode, when the mode is selected, the picture
being
displayed is stored in memory as a still image.
z
(5) Select -/+, then press the center 0 on the control button repeatedly to adjust
the effect. See page 56 for details on each digital effect mode.
i
E
(6) Press DISPLAY to turn off the screen buttons. Pressing DISPLAY again
0
displays the video control buttons.
4
P
P
To return to the FN screen
Select 3 OK, then press the center 0 on the control button after step 5. The PAGE2
seeen appears. Next, select EXIT, then press the center 0 on the control button.
To cancel the digital effect function
Select 3 OFF, then press the center 0 on the control button in step 4 or 5
69