Sony DCR-IP5 Operating Instructions Manual page 86

Recording a program
When you have finished dubbing the tape
Select m, then press the center 0 on the control button on your camcorder and stop
the playback of the VCR.
If ydur VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video output jack and the
white or red plug to the audio output jack on the VCR. When the white plug is
connected, the left channel audio is output, and when the red plug is connected, the
right channel audio is output.
If your VCR has an 5 video jack
Connect using the S video plug to faithfully obtain original pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable. Connect the S video plug to the S video jack of the VCR. This connection
produces higher quality MICROMV format pictures.
Note (DCR-IP7BT only)
When you press MEMORY PLAY on the Remote Commander in step 5, an image
recorded on the "Memory Stick" is displayed. If you select REC START, then press the
center 0 on the control button, the image will be recorded on the tape. To stop memory
playback, press MEMORY PLAY on the Remote Commander again.
86