Sony DCR-IP5 Operating Instructions Manual page 52

Using the fader function
(1) When fading in [a]
In standby mode, select FN, then press the center 0 on the control button. The
PAGE1 screen appears.
When fading out [b]
During recording, select FN, then press the center 0 on the control button. The
PAGE1 screen appears.
(2) Select FADER, then press the center 0 on the control button. The FADER
screen for selecting the fader mode appears.
(3) Select the desired fader mode, then press the center 0 on the control button.
The top of the selected button is indicated with a green bar.
(4) Press DISPLAY to turn off the screen buttons.
(5) Press START/STOP. The fader indicator flashes, then lights up. After the fade
in/out is carried out, your camcorder automatically returns to the normal
To return to the FN screen
Select 3 OK, then press the center 0 on the control button after step 3. The PAGE1
screen appears. Next, select EXIT, then press the center 0 on the control button.
To cancel the fader function
Before pressing START/STOP, select 3 OFF, then press the center 0 on the control
button.
Note
You cannot use the following functions while using the fader function, and vice versa.
-Digital effect
-Tape Photo recording
52