Sony DCR-IP5 Operating Instructions Manual page 119

Recording still images on a "Memory Stick"
- Memory Photo recording
When the POWER switch is set to MEMORY
The following functions do not work:
-Wide mode
-Digital zoom
- SteadyShot
- Fader
-Picture effect
-Digital effect
-Title
-Low lux mode of PROGRAM AE (The indicator flashes.)
While you are recording a still image
You can neither turn off the power nor press PHOTO.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image displayed on the screen when you
press the button.
When recording a still image in step 2
The image momentarily flickers. This is not a malfunction.
Recording data
*The recording data (date/time or various settings used when recording) are not
vl
d
"displayed while recording. However, they are automatically recorded onto the
"Memory Stick."
To display the recording data, press DATA CODE on the Remote Commander. When
,o
(, using the camcorder for this operation, select CAM DATA or DATE DATA, then press
3
d
the center 0 on the control button, via DATA CODE on the PAGE3 screen (p. 41).
s
The number of still images recordable on a "Memory Stick"
It varies according to the image quality mode and the complexity of the subject.
You can record still images continuously. Select the multi screen mode described below
before recording.
Multi screen mode
Your camcorder shoots nine still images at about 0.5 set intervals and displays the
images on a single page divided into 9 boxes. ( Indicator: B)
119