-
Recording
- Basics -
Recording
a picture
Your camcorder automatically
focuses for you.
(1) Remove the lens cap and pull the lens cap string to fix it.
(2) Install the power source. See "Step 1 Preparing
the power supply"
for more
information
(p. 18).
(3) Insert a cassette. See "Step 3 Inserting
a cassette" for more information
(p. 27).
(4) Press OPEN, then open the LCD panel.
ft
(5) Set the POWER switch to CAMERA.
The CAMERA
lamp lights up and your
camcorder
is set to the standby mode.
i
5
(6) Press START/STOP.
The STBY indicator
flashes. Then, the REC indicator
In
I
appears instead and the camcorder
starts recording.
The camera recording
P
lamp located on the front of your camcorder
lights up. To stop recording,
press
i
START/STOP
again.
Camera recording
After recording
(1) Set the POWER switch to OFF (CHG).
(2) Close the LCD panel.
(3) Eject the cassette.
(4) Remove the power source.
29