Focusing
manually
You can gain better results by manually adjusting the focus in the following
cases.
Normally,
focus is automatically
adjusted.
*The autofocus mode is not effective when shooting
-subjects through glass coated with water droplets
-horizontal
stripes
-subjects with little contrast with backgrounds such as walls and sky
l
When you want to change the focus point from a subject in the foreground to a subject
in the background
l
Shooting a stationary subject when using a tripod
(1) In CAMERA
or MEMORY
(DCR-IP7BT
only) mode, select FN, then press the
2.
center 0 on the control button. The PAGE1 screen appears.
s
(2) Select FOCUS, then press the center 0 on the control button. The FOCUS
I
*
screen used for adjusting
the focus appears.
(3) Select MANUAL,
then press the center 0 on the control button. The top of the
selected button is indicated
with a green bar and the Q indicator
appears.
,~ (4) Select A l or + A, then press the center 0 on the control button repeatedly
to
adjust the focus.
A l : To move the focus point closer
+ P : To move the focus point further away
You can also adjust the focus by pressing d/b
repeatedly
after you select
A Car+
9.
(5) Press DISPLAY
to turn off the screen buttons.
65