Adjusting
the white
balance
manually
To return to the automatic
white
balance mode
Select AUTO,
then
press the 0 center on the control button in step 4.
If the picture is being taken in a studio lit by TV lighting
We recommend that you use the $: indoor mode.
When you record under fluorescent
lighting
Use the automatic white balance or hold mode.
Your camcorder may not adjust the white balance correctly in 79: indoor mode.
In automatic
white balance mode
Point your camcorder at the white subject for about 10 seconds after setting the POWER
2
2
switch to CAMERA to get better adjustment when:
-You detach the battery for replacement.
3
0
P
-You bring your camcorder from the interior of a house holding the exposure, and vice
versa.
i
5.
In hold white balance mode
2
Set the white balance to AUTO and reset to HOLD after a few seconds when:
,o
- You change the PROGRAM AE mode.
%
-You bring your camcorder from the interior of a house, and vice versa.
z.
s
63