Viewing
images
recorded
on a "Memory
Stick"
using your
computer
For Windows
users
(I) Turn on the power of your computer
and allow Windows
to load.
(2) Connect one end of the USB cable to the USB jack on the camcorder
and the
other end to the USB connector on your computer.
(3) Insert a "Memory
Stick" into your camcorder,
and connect the AC power
adaptor to your camcorder
and then to a wall outlet.
(4) Set the POWER switch to MEMORY.
USB MODE appears on the screen of the camcorder.
(5) Open "My Computer"
on Windows
and double click the newly recognized
drive. (Example: "Removable
Disk (E:)")
The folders inside the "Memory
Stick" are displayed.
(6) Select and double-click
the desired image file from the folder.
For the detailed folder and file name, see "Image file storage destinations
and
image files" (p. 161).
As for stored files using
the
network
function,
refer to the network
function
operating
instructions.
USB connector
Computer
USB cable
Push into the end
Desired file type
Still image/
Moving picture*
Double-click
in this order
"Dcim" folder
-
"100msdcf" folder
-
Image file
* Copying a file to the hard disk of your computer before viewing it is recommended. If
ou play back a file directly from the "Memory Stick," the image and sound may
&reak up.
159