Sony DCR-IP5 Operating Instructions Manual page 57

Using special effects - Digital effect
(1) In CAMERA mode, select FN, then press the center 0 on the control button
The PAGE1 screen appears.
(2) Select PAGE3, then press the center 0 on the control button. The PAGE3
screen appears.
(3) Select DIG EFFT, then press the center 0 on the control button. The DIG EFFT
screen used for selecting the desired digital effect mode appears.
(4) Select the desired digital effect mode, then press the center 0 on the control
button. In STILL and LUMI. modes, the still image is stored in memory.
(5) Select -/+, then press the center 0 on the control button repeatedly to adjust
the effect. You can also adjust the effect by pressing d/k repeatedly after you
b
select -/+.
Items to be adjusted
2
b
STILL The rate of the still image you want to superimpose on the moving
R
FLASH
picture
The interval of flash motion
s!
n
3
LUMI.
The color scheme of the area in the still image which is to be swapped
ii
with a
movmg
picture
e
z.
TRAIL The vanishing time of the incidental image 0
s
SLOW SHTR Shutter speed. The larger the shutter speed number, the slower the
6"
i)
shutter speed.
OLD MOVIE No adjustment necessary
o (6) Press DISPLAY to turn off the screen buttons.
This bar appears when the STILL,
FLASH, LUMI., or TRAIL mode is
selected.
57