Transporting And Long-Term Storage; Transporting - MUTOH VJ-426UF Operation Manual

Transporting and long-term storage

3

Transporting and long-term storage

Please refer to this section when transporting or storing this product for a long time.

Transporting

When transporting this product, it is necessary to wash inside with cleaning cartridge, discharge waste ink and fixate the print
head with packaging material. If transported as it is, it can cause ink leakage and damage to the print head.
When it is used again, conduct reinstallation work and initial charging.
Important!
• When moving this product, always empty the waste ink tank even if it is for a short distance.
If ink splashes inside the waste ink tank while being moved, it can cause damage.
• Do not tilt, set against something or place this product upside down.
Otherwise the ink may leak or the handling mentioned above may cause abnormality.
1.
Head cleanining and discharging waste ink
[1]
1
Press!
2
[2]
Menu 3 :
[3]
Mnt.5 :
[4]
Longstore :
[5]
Empty WasteInk
[6]
Remove Cartridges
Media Set
Low speed
Set Media
Maintenance>
Longstore
Start
->E
Press the [Menu] key.
• Press the [ - ] key several times, to bring up the display on the left.
• Press the [>] key.
• Press the [ - ] key several times, to bring up the display on the left.
• Press the [Enter] key.
Press the [Enter] key.
When the message on the left appears, transfer the waste ink into a
container.
"Transfer the waste ink" on page 75
tank"
• Press the [Enter] key.
• The message on the left will appear.
under "Emptying waste ink

Transporting

91