Answering Machine Settings - Alcatel XP1050 User Manual

10.5.2. Record your own outgoing message (OGM)
1. Press MENU on the handset in idle mode.
2. Press or
3. Press SELECT again to select Outgoing msg.
4. The handset displays OUTGOING MSG and announces "Announcement,
press PLAY or press RECORD.". Press RECORD.
5. The handset announces, "Record after the tone. Press STOP when you are
done." After the tone, speak towards the microphone of the handset.
6. Press STOP when you finish recording.
7. The handset automatically plays back the newly recorded outgoing
message. Press STOP to stop the playback at any time. After the
outgoing message playback, press PLAY to replay the recorded outgoing
message, or RECORD to record again if desired.
Notes:
• Your outgoing message can be up to 90 seconds in length.
• Outgoing messages shorter than two seconds are not recorded.
10.5.3. Delete your outgoing message
1. Press MENU on the handset in idle mode.
2. Press or
3. Press SELECT again to select Outgoing msg.
4. The handset displays OUTGOING MSG, press PLAY to play the outgoing
message.
5. While the outgoing message is playing, press DELETE to delete your own
recorded outgoing message. The handset displays Reset outgoing msg to
default? Press YES to confirm. You hear a confirmation tone.

10.6. Answering Machine Settings

10.6.1. Set Answer Delay
You can set the number of rings before the answering machine answers and
starts playing your OGM. You can set the answering machine to answer after
two to eight rings or TIME SAVER.
With time saver selected, the answering machine answers after 2 rings when
you have new messages, and after 4 rings when you have no new messages.
1. Press MENU on the handset in idle mode.
2. Press or
3. Press or
4. Press or
5. Press or
to save. You hear a confirmation tone.
to select Answering sys, then press SELECT.
to select Answering sys, then press SELECT.
to select Answering sys, then press SELECT.
to select Ans sys setup, then press SELECT.
to select # of rings, then press SELECT.
to select from 6, 5, 4, 3, 2 or Time saver, then press SET
48