Repeater (Optional) - Alcatel XP1050 User Manual

red light on the telephone base remains on. It takes about 90 seconds
to complete the registration process. The handset displays HANDSET
X Registered (X represents the registered handset number assigned
automatically). The
when registration completes.
If registration fails, the handset shows Registration failed, then Put handset
on BASE to register. Then, you can try the registration manually below.
Register an additional handset through the menu
1. Press MENU then
2. Press SELECT then
3. The display will show "Press and hold PAGE button on BASE".
4. Press and hold
light turns on, the handset display will show "Registering handset...".
5. The handset will return to idle mode if the registration is successful.
Deregister Handsets
If you want to replace a handset or reassign the designated handset number of
a registered handset, you must deregister all the handsets and then individually
register each handset.
1. Make sure that all handsets are out of the telephone base and chargers
before you begin deregistration.
2. Press and hold
light flashes, then release
3. Quickly press
4. All system handsets show Press and hold PAGE button on BASE and
you hear a confirmation tone when the deregistration completes. The
deregistration process takes about 10 seconds to complete.
5. After deregistering, register each handset again individually.
Notes:
You cannot deregister the handsets if any other system handset is in use.
If the deregistration process fails, you may need to reset the system and try
again. To reset, unplug the power from the telephone base and plug it back in.
4.18.

Repeater (optional)

Alcatel XP1050 can support Alcatel Repeaters well (XP Repeater or Office
Repeater) which are bought separately so that you can extend the coverage of
your telephone system in all directions.
Please refer to the operation manual of Alcatel Repeater for detailed operation.
light turns off and the handset beeps
or to select Settings.
or to select Register, then press SELECT.
on the telephone base for around 4 seconds until the
on the telephone base for about 10 seconds until the
.
again while the light is still flashing.
31