Bluetooth Setup - Alcatel XP1050 User Manual

this range.
• Monitor your mobile phone's usage, because minutes may be deducted from
your mobile plan for the duration of all mobile calls, depending on the terms
of your plan.
Active device slots - the Device list has two active slots for two mobile
phones, or one mobile phone and one headset. When a device in the list is
active it will have a D1: or D2: in front of the device name. In order to use a
Bluetooth device on a call, it must be in an active slot and be connected.
Connected - When a Bluetooth device is connected, a 1 and/or 2 will display
after on the handset screen and the
will be on. If a device loses its connection to the telephone base, it must be
reconnected before you can use the device with the Alcatel XP 1050.
Disconnected - when a device is disconnected,
on the handset screen and the
Discoverable mode - before a Bluetooth enabled device can be paired, it must
be set to this mode. When pairing your mobile phone, the telephone base is
in this mode. When pairing a headset, the headset must be set to this mode.
Depending on the manufacturer, this mode is sometimes referred to as "Find
Me" or "Visibility".

4.3.2 BLUETOOTH SETUP

4.3.2.1. Add a Mobile Phone
1. Press MENU in idle mode to enter the main menu.
2. Press or
3. Press SELECT to choose Add device.
4. Press SELECT again to choose Add mobile. The screen displays Please
wait... followed by 1. If mobile is connected to BT device, please
disconnect it.
• If there are already 4 paired devices on the device list, the 4th device on
the device list will be automatically removed, regardless of whether the
new device pairing is successful or not.
• If there are already 2 active devices on the device list with prefix D1: or
D2:, the handset shows Only 2 devices can be ready for connection.
You are prompted to deactivate an active device.
5. Press NEXT. The screen displays 2. Place mobile phone next to base.
• All devices that are connected to the telephone base are disconnected
until the pairing process is completed.
6. Press NEXT to turn on the telephone base discoverable mode. The screen
displays Set mobile to search base: XP1050 discoverable PIN: 0000.
Promptly turn on the Bluetooth feature of your mobile phone and search for
or add new devices.
and/or
to select Bluetooth, then press SELECT.
and/or light on the telephone base
and/or
light on the telephone base is off.
18
displays after