Registration - Alcatel XP1050 User Manual

• Do not pick up the power supplying handset from base when Power Fail
Back-Up mode is activated.
• In power failure back-up mode, none of the base functions, including the
answering machine and Bluetooth, your cordless phone will operate.
• It may take up to 90 seconds to transition through the power fail back-up
activation process as the base and handset(s) synchronise with each other.
• If there is more than one handset registered to the base, the handset on the
main base unit should be left as a power supply of the base and you can use
the other handset(s) to make calls like normal.
• The handset should always remain on the main base unit during a call.
Make a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
1. Once the handset is placed onto the main base unit, enter the telephone
number, and then press
automatically and call is made.
OR
1. Lift up the handset and enter the telephone number.
2. Place the handset back onto the main base unit within 60 seconds.
The speakerphone will be turned on automatically and call is made. Handset
may show "Please wait..." whilst the handset starts up the base before
dialling.
3. To end the call, press
Answer a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
1. When the phone rings, keep the handset on the main base unit and press
or to answer the call. The speakerphone will be turned on automatically
and call is answered.
2. To end the call, press

4.17. Registration

Your handset and base station is pre-registered. If for some reason, the handset
is not registered to the base station, "Press and hold PAGE button on BASE"
will be displayed on the handset screen, register your handset according to the
following procedure.
Easy registration for additional handset
1. Make sure the handset is out of the telephone base or charger and shows
Press and hold PAGE button on BASE before you begin registration.
2. Press and hold
the light turns on, and then put the handset you wish to register on the
telephone base cradle, when it shows Put handset on BASE to register.
3. The handset displays Registering handset... on the handset and the
or . The speakerphone will be turned on
.
.
on the telephone base for around 4 seconds until
30