Alcatel T16 - Cordless Telephone User Guide
![]()
TELEPHONE KEYS
![Alcatel - T16 - TELEPHONE KEYS TELEPHONE KEYS]()
- Hook switch
- Handset volume switch
Flash button
Out button - Ringer volume switch
Redial button
Up button
Down button - MENU button
Phonebook button
Delete button - Wall mounting hook
DISPLAY ICONS
![Alcatel - T16 - DISPLAY ICONS DISPLAY ICONS]()
- Month
- Day
- Hour
- Minutes
- Voice mail*
- New CID*
- In-coming Call*
- Call-log number*
- Phone number display*
* Subject to subscription and availability of the service from the fixed line operator.
INSTALLING THE PHONE
![Alcatel - T16 - INSTALLING THE PHONE INSTALLING THE PHONE]()
Your phone should be placed on a level surface or you can mount it on a wall.
CONNECTING THE TELEPHONE
- Plug the coiled cord into the jack on the handset.
- Plug the long straight line cord into a modular wall telephone jack.
- Set the RINGER switch on the base to HI.
+ = HI
= MID
- = LOW
WALLMOUNTING THE PHONE
![]()
- Push the Wall mounting hook up (12) and out with your thumb, turn it over, and replace it in the slot on the base.
- Drill the hole as draft.
- Slip the mounting holes (on the bottom of the base) over the wall plate posts and firmly slide the unit down into place.
GENERAL SETTINGS (In Idle Mode)
Setting date and time:
- MENU/
or
to SET 1 DATE / MENU /
or
/MENU.... to enter Year, Month, Day, Hour and Minute / MENU.
Setting local area code:
- MENU/
or
to SET 2 CODE / MENU /
or
/MENU.... to enter your area code / MENU.
Setting long distance code:
- MENU/
or
to SET 3 PCODE / MENU /
or
to enter your long distance code / MENU.
Setting Flash time to operate correctly on your network:
- MENU/
or
SET 4 FLASH/ MENU /
or
to select FLASH 90/ 110 / 300/600 or1000/ MENU.
Setting TONE or PULSE (In Idle Mode):
- Hold * button for 3 seconds to select Tone or Pulse mode.
Setting CONTRAST (In Idle Mode):
- Press R button until desire contrast level is reached.
MAKE A CALL
- Redial a number:
or ![]()
- The last number called is automatically redialed.
- From call log list*:
or
to select the caller number ![]()
- From direct memories:
or
REVIEW CALLER ID NUMBER (In Idle Mode)
or
, to review caller number.
DELETE CALLER ID NUMBER (In Idle Mode)
- Delete a Caller ID number:
or
to select the number / ![]()
- Delete all Caller ID number:
or
to select Caller ID number / long press
to delete all Caller ID number.
STORE NUMBER (In Idle Mode)
- Store a telephone number: 0...9 to input number / MENU / 0...9 to select memory location.
- Store an incoming call number:
or
to select the number / MENU / 0...9 to select memory location - Store an outgoing number:
to select the number /MENU / 0...9 to select memory location
REVIEW AND DIAL BACK AN OUTGOING NUMBER
- Review an outgoing number (In Idle Mode):
to select number - Dial back an outgoing number (In Idle Mode):
to select number / ![]()
DELETE OUTGOING NUMBER
- Delete an outgoing number (In Idle Mode):
to select number/ - Delete all outgoing number (In Idle Mode):
to select number/ long press
SAFETY
Donotuse your telephone tonotifya gasleak orother potential explosion hazard. Do not open your device or its power supply to avoid risk of electricalshock. Do not attempt to open the batteries, as they contain hazardous chemical substances. Your telephone must be located in a dry place away from hot, humide and direct sunlight condition. To avoid radio signal interference, placethephone at least 1 meter away from other electrical appliances or other phones.
www.alcatel-home.com
![]()
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Alcatel T16 - Cordless Telephone User Guide
Need help?
Do you have a question about the T16 and is the answer not in the manual?
Questions and answers