Alcatel XP1050 User Manual page 19

7. Your mobile phone may require a passcode. In this case the handset screen
displays Check mobile. ENTER PIN CODE. Enter the mobile phone
passcode into the handset and press SET to save.
8. Enter the PIN of the telephone base (the default PIN is 0000) into your
mobile phone to continue the pairing process. The handset displays Adding
Mobile Phone A to device list...
9. When a device is successfully connected, the handset displays Mobile
Phone A is added and connected to base. You hear a confirmation tone.
The corresponding
telephone base (
4.3.2.2. Add a headset
To pair and connect a headset:
1. Repeat step 1 to 3 in last section.
2. Press
or
displays Please wait... followed by If headset is connected to mobile,
please disconnect it.
• If there is another headset already active, the screen shows Only 1
headset in device list can be ready for connection and prompt you
to replace an existing paired device.
• When you already have 2 active devices, the handset shows Only 2
devices can be ready for connection. The telephone base will
deactivate another headset from an active slot automatically.
3. Press NEXT. The screen displays Pls set headset to discoverable mode.
Set your headset to discoverable mode (refer to the user's manual of your
headset), then press NEXT.
• All devices that are connected to the telephone base are temporarily
disconnected.
4. The screen displays Searching for Bluetooth headsets...
5. When the screen displays the found devices, press
headset and then press SELECT.
6. Enter the PIN of your headset. The PIN for most Bluetooth devices is 0000
(refer to the user's manual of your headset). Then press NEXT.
7. The screen displays Adding Headset A to device list... when the base is
connecting to your headset.
8. When a device is successfully connected, the handset displays Headset A
is added and connected to base and the corresponding
hear a confirmation tone. The corresponding light on the telephone base
( ) turns on.
or
If you have trouble pairing your mobile or headset, it may not be compatible
with your Alcatel XP 1050.
Notes:
• The pairing process may take up to one minute. If the pairing process fails,
try again.
1 or 2 displays. The corresponding device light on the
or ) turns on.
to select Add headset, then press SELECT. The screen
19
to select your
or
1 or 2. You