Alcatel XP1050 User Manual page 55

Table of Contents

Advertisement

to your SIM card, then download from your SIM card. For more information
on how to transfer contacts between your SIM card and your phone memory,
refer to the user's manual of your mobile phone.
Can Alcatel XP 1050 help the poor mobile phone reception in my house
If your mobile phone has poor reception in your area, Alcatel XP 1050
cannot improve the reception. However, if you have a location in your
area with better reception, you can leave your mobile phone in that location
while you use Alcatel XP 1050 mobile line. In order for this to work, the
mobile phone must be within 9 metres of the telephone base for optimal
performance.
The listening volume of my mobile call is too loud or quiet
During a mobile call, if the listening volume is too loud or quiet, try
changing the volume on your mobile phone. On some mobile phones,
changing the volume on the mobile phone affects your mobile call volume
on the Alcatel XP 1050 handset.
Phone does not work
Make sure you installed the battery correctly.
Check that the mains power is correctly connected.
No dial tone
Is the telephone cord plugged into the phone socket?
Check that the mains power is switched on.
Only use the telephone cord supplied with the phone.
The telephone line cord might be malfunctioning. Install a new telephone
line cord.
Move the handset closer to the telephone base. It might be out of range.
Disconnect the telephone and connect a different telephone. If there is
no dial tone on this telephone, the problem is in your wiring or local service.
Contact your local telephone company.
Cannot dial out or receive calls
Check that the mains power is correctly connected.
The battery may need recharging.
Has there been a power cut? If so, place the handset back on the base for
10 seconds and try again. If it still does not work disconnect the battery and
mains power for 10 minutes, then reconnect and try again.
If you are connected to a PABX, check whether you need to dial an access
code.
Handset does not ring
The ringer volume may be switched off.
Check that the mains power is correctly connected.
Make sure the handset is registered to the base.
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents