Safety - Alcatel XP1050 User Manual

13.

SAFETY

In the event of an electrical hazard, the mains adapter acts as 230V power
isolating device. It should therefore, as a precaution, be installed close to the
appliance and be easily accessible. To disconnect the device from the primary
power source, the mains adapter must be removed from the 230V AC/50 Hz
socket.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power failure,
telephones that use cordless handsets will not work.
You will then be unable to make or receive calls in the event of an emergency.
This is why we recommend that you also keep a conventional telephone – one
that doesn't require a power supply – as a backup.
! Do not use your telephone to notify a gas leak when standing in the
vicinity of the leak.
It is recommended that you avoid using this device during electrical storms.
Do not attempt to open the batteries, as they contain chemical substances. In
the event of leakage, avoid contact with the skin, eyes, nose and mouth. In the
event of contact, rinse the affected part for about twenty minutes with running
water and seek urgent medical attention. Clean the product with absorbent
paper or a dry cloth and contact your reseller for replacement batteries.
ATLINKS hereby declares that the following models conform to the essential
requirements and other applicable provisions of European directive 1999/5/EC.
Alcatel XP1050 / Alcatel XP1050 Duo/Trio
57