Alcatel XP1050 User Manual page 20

• If you put the handset back in the telephone base or charger while pairing,
the process discontinues and the handset returns to idle mode.
• If a device fails to connect, the handset displays Mobile Phone A is added
to device list, and then displays Pls use mobile to connect to base,
or Headset A is added into the device list, and then displays Please
use headset to connect to base.
• When a connected headset is charging, it may disconnect from the telephone
base and the corresponding light on the telephone base (
For some headset models, you may need to turn on the headset and
reconnect it to the telephone base again.
• Mobile Phone A and Headset A are default names used in the user guide.
The actual name of paired mobile phone and headset will be displayed
instead in the LCD of XP1050.
4.3.3. Device list and connection
Up to 4 devices can be paired to the telephone base. All paired devices are
shown on the device list. To use a paired device, it must be connected and in an
active slot (
or
headset can be on a call at a time.
Once you have paired a device with the telephone base, you do not need to
repeat the pairing procedure again unless you delete the device from the device
list.
Note:
When connecting a Bluetooth device to the device list, all connected devices will
be temporarily disconnected until the procedure is complete. It may take up to
2 minutes to reconnect.
4.3.3.1. Review the active device list
1. Press MENU on the handset in idle mode.
2. Press
or
3. Press
or
4.3.3.2. Connect/disconnect an active device
While in the active devices menu, you may connect or disconnect your active
device.
1. Repeat step 1 to 3 in last section.
2. Press
or
3. Press
or
then press SELECT to confirm. The handset displays Device connected/
Device disconnected. You hear a confirmation tone.
4.3.3.3. Remove a device
When you already have the maximum of 4 paired devices on the device list and
you want to add another device, you must first delete a device from the device
list.
) on the device list. Only one Bluetooth mobile phone or a
to select Bluetooth, then press SELECT.
to select Device list, then press SELECT.
to select a device, then press OPTION.
to select Connect/Disconnect (whichever is applicable),
20
) turns off.
or