Alcatel XP1050 User Manual page 56

Table of Contents

Advertisement

No display
The battery may be flat, dead or incorrectly inserted.
Recharge or replace the battery.
Handset displays "Out of range or no pwr at base"
Is the handset registered correctly to the base?
Check that the mains power is correctly connected.
Check that the handset is within range of the base.
Is the battery low? Place the handset on the base/charger to recharge.
You hear the busy tone when you press
Make sure the handset is in range of the base.
Another handset registered to your Alcatel XP 1050 base may be on the
line.
Answering machine does not record any messages
Make sure the answering machine is switched on.
The memory may be full, please delete some old messages to free up space.
Cannot access your messages from another phone
Have you changed the remote access security PIN code?
Make sure you are calling from a touch-tone telephone. When dialling a
number, there should be tones.
The answering machine might not detect the remote access code when your
outgoing message is playing. Wait until the outgoing message is over before
entering the code.
There might be interference on the telephone line you are using. Press the
dial pad keys firmly when dialing.
Buzzing noise on my phone or on other electrical equipment nearby
Sometimes your Alcatel XP 1050 can interfere with other electrical
equipment if it is placed too close. It is recommended that you place your
Alcatel XP 1050 at least one metre away from electrical appliances or
metal obstructions to avoid any risk of interference.
If you have an ADSL internet service ensure correct filters are installed to
prevent interference.
The store where you bought your telephone can also provide you with
information and after-sales support.
IMPORTANT
This product features Power Fail Back-Up. During a mains power interruption
within first 4 hours and handset is put on base cradle, the power stored in the
handset battery can be supplied to the main base, so you can make calls or
receive calls. To make calls or answer calls, you can refer to section 4.4 and 4.5.
56

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents