Volvo VNL Service Manual page 95

Group 30 Electrical System—VNL, VNM
8
Install the right side cowl panel using
bolts on the outside and inside of the
door jamb. START all bolts and align
the cowl before tightening. Torque to
24 ± 4 Nm (212 ± 35 in-lb).
9
Install the right side drip molding with
3 screws. Torque the top 2 screws to
1.2 ± 0.2 Nm (10.6 ±2 in-lb) , and the
bottom to 3 ± 0.5 Nm (26 ± 5 in-lb).
10
Install 3 bolts in the lower right side
mirror arm. Torque to 24 ± 4 Nm (18 ±
3 ft-lb).
11
W3000670
24 ± 4 Nm Install the left side cowl panel using
(212 ± 35 in- bolts on the outside and inside of the
door jamb. START all bolts and align
lb)
the cowl before tightening. Torque to
24 ± 4 Nm (18 ± 3 ft-lb).
12
W3000663
1.2 ± 0.2 Nm
(10.6 ± 2 in-lb)
Install the washer bottle. START all
3 Nm ± 0.5
bolts, then tighten nuts. Torque to 24
(26 ± 5 in-lb)
± 4 Nm (18 ± 3 ft-lb).
24 ± 4 Nm
(18 ± 3 ft-lb)
Service Procedures
W3000671
24 ± 4 Nm
(18 ± 3 ft-lb)
W3000668
24 ± 4 Nm
(18 ± 3 ft-lb)
93