Volvo VNL Service Manual page 93

Group 30 Electrical System—VNL, VNM
13
Remove the wiper arm nut from both
arms, and remove the wiper arms.
14
Remove the cowl panel under the
windshield by removing the linkage
shaft caps and 11 torx bolts from
panel.
15
Disconnect the electrical connector
from the wiper motor and disconnect
the hose to the washer.
16
Remove the wiper motor and linkage
assembly by removing the 5 torx bolts
from assembly.
Removal of wiper motor from linkage
assembly
17
Remove the nut from the motor linkage
arm and push the arm from the shaft.
18
Push the linkage arm away from the
area where the motor is bolted to the
housing. Remove 3 bolts from the mo-
tor, then remove motor.
W3000997
W3000669
Service Procedures
91