Volvo VNL Service Manual page 61

Group 30 Electrical System—VNL, VNM
Installation
1
Mount the wiper switch to the column
with the bolts on each side. Torque to
5 ± 0.8 Nm (44 ± 7 in-lb). Connect
electrical connector.
2
Pull steering column back and up,
where possible. Install front cover by
installing torx bolts. Torque to 5 ± 0.8
Nm (44 ± 7 in-lb).
3
Push steering column forward and up,
where possible. Install rear cover of
steering column by installing torx bolts
and attaching rubber grommets at
stalk switches. Torque to 5 ± 0.8 Nm
(44 ± 7 in-lb).
4
Install the 2 clips on the bottom of the
steering column cover.
W3000652
5 ± 0.8 Nm
(44 ± 7 in-lb)
5 ± 0.8 Nm
(44 ± 7 in-lb)
5 ± 0.8 Nm
(44 ± 7 in-lb)
Service Procedures
W3000655
59