Vlan > Voice Vlan > Voice Device List; Vlan > Auto Surveillance Vlan - D-Link SmartPro DGS-1500-20 User Manual

5 Configuration
VLAN > Voice VLAN > Voice Device List
The Voice Device List page displays the information of Voice VLAN.
Select a port or all ports and click Search to display the Voice Device information in the table.
VLAN > Auto Surveillance VLAN
Similar as Voice VLAN, Auto Surveillance VLAN is a feature that allows you to automatically place the video
traffic from D-Link IP cameras to an assigned VLAN to enhance the IP surveillance service. With a higher
priority and individual VLAN, the quality and the security of surveillance traffic are guaranteed. The Auto
Surveillance VLAN function will check the source OUI/MAC address / VLAN ID on the incoming packets. If it
matches specified MAC address / VLAN ID, the packets will pass through switch with desired priority.
Auto Surveillance VLAN Global Settings:
Auto Surveillance VLAN State: Select to enable or disable Auto Surveillance VLAN. The default is
Disabled.
VLAN ID: By default, the VLAN ID 4094 was created as Auto Surveillance VLAN. You also can create
another Auto Surveillance VLAN by selecting a VLAN ID that you have created a VLAN from the 802.1Q
VLAN page. The member port you configured in 802.1Q VLAN setting page will be the static member port of
Auto Surveillance VLAN.
Priority: Specifies the priority level of Auto Surveillance VLAN on the Switch. The possible values are
Highest, High, Medium and Low. The default priority is High.
Note: It is recommended setting the highest
priority for Voice VLAN to guarantee the quality of
VoIP traffic.
Figure 5.34 – VLAN > Voice VLAN > Voice Device List
Figure 5.35 – VLAN > Auto Surveillance VLAN
3 5
3 5
D-Link Web Smart Switch User Manual