Starting The Remote Ui - Canon Laser Shot Remote Ui Manual

Starting the Remote UI

Start the Remote UI using a web browser.
IMPORTANT
Depending on the printer you are using, the firmware version of the compatible network
2
board varies. If the firmware version is old, the network board may not operate properly.
Download the latest update file from the Canon website to update the firmware.
You can also update the firmware using the update file in the "NB-C1_Firmware" folder in
the CD-ROM supplied with the printer.
For details on the procedures for checking the firmware version and updating the
firmware in the CD-ROM supplied with the printer, see the README file in the
"NB-C1_Firmware" folder.
1
2
2-2 Starting the Remote UI
Start the web browser.
Enter the following URL in [Address] or [Location], then press
the [ENTER] key on your keyboard.
http://<the IP address of this printer>/
Input Example : http://192.168.0.215/