Canon Laser Shot Remote Ui Manual page 29

a [Network Interface]
Displays information about the network interface.
b [Reset]
Resets the print server. After you change the settings for the network protocols, reset the
print server by clicking this button to make the settings effective. You can reset the print
server only when you have logged in as Administrator.
c [Show Parameter List]
Displays the [Parameter List] page of the printer. You can also initialize the network
settings in the [Parameter List] page. You can initialize the network settings only when you
have logged in as Administrator. For more details, see "Chapter 3 Managing the Printer in
the Network Environment" in Network Guide.
IMPORTANT
Make sure that the printer is not operating before initializing the network settings. If you
initialize the print server while the printer is printing or receiving data, the received data
may not be printed properly, or may result in paper jams or damage to the printer.
d [Firmware]
Displays the name of the current network interface and its version.
e [Download Site]
Displays the page that allows you to download the firmware. You can download the
firmware only when you have logged in as Administrator.
NOTE
The [Support Links] page (See p. 3-14) allows you to change the link that is displayed by
clicking the [Download Site] button.
f [Update Firmware]
Updates the firmware. You can update the firmware only when you have logged in as
Administrator. For more details, see "Chapter 5 Appendix" in Network Guide.
IMPORTANT
Depending on the printer you are using, the firmware version of the compatible network
•
board varies. If the firmware version is old, the network board may not operate properly.
Download the latest update file from the Canon website to update the firmware.
You can also update the firmware using the update file in the "NB-C1_Firmware" folder in
the CD-ROM supplied with the printer.
For details on the procedures for checking the firmware version and updating the
firmware in the CD-ROM supplied with the printer, see the README file in the
"NB-C1_Firmware" folder.
When you cannot update the firmware properly or want to know details on the procedure
•
for updating the firmware, see the README file supplied with the firmware.
Make sure that the printer is not operating before updating the firmware. Do not print
•
during the firmware update. Otherwise, the firmware cannot be updated properly.
Displaying/Managing the Printer Status (Device Manager)
3
3-11