The screen of the Remote UI is displayed.
IMPORTANT
If you are not sure about the IP address of this printer, ask the administrator of the
•
printer.
If the host name of the printer is registered in the DNS server, you can enter
•
["hostname"."domain name"] instead of the IP address.
Example: http://my_printer.xy_dept.company.com/
If the screen of the Remote UI is not displayed, make sure that the entered IP
•
address or ["hostname"."domain name"] is correct. When the screen of the Remote
UI is not displayed even if the entered address is correct, consult your network
administrator.
You cannot connect the computer to the printer via a proxy server. If you are using
•
a proxy server, perform the following settings. (The setting varies depending on the
network environment. Consult your network administrator.)
- On the settings for the proxy server of the web browser, add the IP address of this
printer to [Exceptions] (Addresses that do not use the proxy server).
Configure the web browser so that you can use Cookie.
•
If multiple Remote UIs are running simultaneously, the latest setting is effective. It
•
is recommended that only one Remote UI should be running at a time.
NOTE
Depending on the system environment, the screen of the Remote UI is not
displayed even after performing the settings above. In this case, enter "http://<the
IP address of this printer>/cab/top.shtml" in [Address] or [Location] to redisplay the
screen.
Starting the Remote UI
2
2-3